Products Liability Law Daily Wrap Up, CPSC NEWS—TOOLS AND HARDWARE—Pressure washers recalled over shock hazards, (Sep 2, 2026)
Organizations Mentioned:Longer 3D | YERYORK
By WK Editorial Staff
The products were sold on Amazon by Longer 3D and YERYORK.
About 428 pressure washers are being recalled because they lack an integral ground-fault circuit-interrupter (GFCI) and have inadequate-length power cords, posing risks of serious injury or death from shock and electrocution hazards. The recalls involve about 128 Steelite electric pressure washers sold by Longer 3D and 300 YERYORK pressure washers.
Incidents and injuries. No incidents or injuries have been reported in connection with either recalled product.
Product description. The recall includes Steelite-branded electric pressure washers, which are red and black, measure about 30 inches high, 10 inches wide, and 12 inches deep, and feature a foam cannon, four quick-connect nozzles, and a 20-foot hose. Model “AZ6041VC” is printed on a label on the back of the unit. They were sold on Amazon.com from April 2026 through June 2026 for between $45 and $92. The pressure washers were imported by Longer Technology (Hong Kong) Limited, doing business as Longer 3D, and were manufactured in China (CPSC Recall Notice, No. 26-723 (Aug. 27, 2026)).
Also recalled are YERYORK-branded 2.5 GPM electric pressure washers that are green and black and include a 500 mL foam cannon, four quick-disconnect nozzles, a 32.81-foot hose, and four lockable wheels. Only units without a GFCI are included in the recall. The YERYORK brand is printed on the front of the product, and model YE-006 appears on a label near the handle. The units were sold on Amazon.com from March 2025 through June 2026 for about $120 and were manufactured in China by Lanzhou Xinshi Mingchen Information Technology Co. Ltd., doing business as YERYORK (CPSC Recall Notice, No. 26-725 (Aug. 27, 2026)).
Remedy. Consumers should stop using the recalled pressure washers immediately and contact the respective companies for a full refund. Longer 3D is asking consumers to destroy the Steelite pressure washer by cutting the unplugged power cord in half and emailing a photograph of the destroyed unit.
YERYORK is instructing consumers to unplug the pressure washer, cut the power cord in half, and email a photograph of the destroyed product showing the model number. Consumers should then dispose of the recalled products.
Customer contact. Consumers can contact:
Longer 3D by email at [email protected].
YERYORK by email at [email protected] or online at https://yeryork.com and click on “Product Recalls” at the top of the page.
Companies: Longer 3D; YERYORK
ProductRecalls: ProductRecallsNews RecallNewsStory ToolsHardwareNews